Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 61  62  63  64  65  66  67  68  [69]  70  71  72  73  74  75  ...
NoWriterDateCnt.TitleFile(s)
12211정성태4/27/202019239개발 환경 구성: 486. WSL에서 Makefile로 공개된 리눅스 환경의 C/C++ 소스 코드 빌드
12210정성태4/20/202020686.NET Framework: 903. .NET Framework의 Strong-named 어셈블리 바인딩 (1) - app.config을 이용한 바인딩 리디렉션 [1]파일 다운로드1
12209정성태4/13/202017404오류 유형: 614. 리눅스 환경에서 C/C++ 프로그램이 Segmentation fault 에러가 발생한 경우 (2)
12208정성태4/12/202015963Linux: 29. 리눅스 환경에서 C/C++ 프로그램이 Segmentation fault 에러가 발생한 경우
12207정성태4/2/202015799스크립트: 19. Windows PowerShell의 NonInteractive 모드
12206정성태4/2/202018423오류 유형: 613. 파일 잠금이 바로 안 풀린다면? - The process cannot access the file '...' because it is being used by another process.
12205정성태4/2/202015092스크립트: 18. Powershell에서는 cmd.exe의 명령어를 지원하진 않습니다.
12204정성태4/1/202015089스크립트: 17. Powershell 명령어에 ';' (semi-colon) 문자가 포함된 경우
12203정성태3/18/202017936오류 유형: 612. warning: 'C:\ProgramData/Git/config' has a dubious owner: '...'.
12202정성태3/18/202021196개발 환경 구성: 486. .NET Framework 프로젝트를 위한 GitLab CI/CD Runner 구성
12201정성태3/18/202018434오류 유형: 611. git-credential-manager.exe: Using credentials for username "Personal Access Token". [1]
12200정성태3/18/202018523VS.NET IDE: 145. NuGet + Github 라이브러리 디버깅 관련 옵션 3가지 - "Enable Just My Code" / "Enable Source Link support" / "Suppress JIT optimization on module load (Managed only)"
12199정성태3/17/202016167오류 유형: 610. C# - CodeDomProvider 사용 시 Unhandled Exception: System.IO.DirectoryNotFoundException: Could not find a part of the path '...\f2_6uod0.tmp'.
12198정성태3/17/202019528오류 유형: 609. SQL 서버 접속 시 "Cannot open user default database. Login failed."
12197정성태3/17/202018810VS.NET IDE: 144. .NET Core 콘솔 응용 프로그램을 배포(publish) 시 docker image 자동 생성 - 두 번째 이야기 [1]
12196정성태3/17/202015942오류 유형: 608. The ServicedComponent being invoked is not correctly configured (Use regsvcs to re-register).
12195정성태3/16/202018262.NET Framework: 902. C# - 프로세스의 모든 핸들을 열람 - 세 번째 이야기
12194정성태3/16/202020992오류 유형: 607. PostgreSQL - Npgsql.NpgsqlException: sorry, too many clients already
12193정성태3/16/202017903개발 환경 구성: 485. docker - SAP Adaptive Server Enterprise 컨테이너 실행 [1]
12192정성태3/14/202019923개발 환경 구성: 484. docker - Sybase Anywhere 16 컨테이너 실행
12191정성태3/14/202021040개발 환경 구성: 483. docker - OracleXE 컨테이너 실행 [1]
12190정성태3/14/202015621오류 유형: 606. Docker Desktop 업그레이드 시 "The process cannot access the file 'C:\Program Files\Docker\Docker\resources\dockerd.exe' because it is being used by another process."
12189정성태3/13/202021205개발 환경 구성: 482. Facebook OAuth 처리 시 상태 정보 전달 방법과 "유효한 OAuth 리디렉션 URI" 설정 규칙
12188정성태3/13/202026020Windows: 169. 부팅 시점에 실행되는 chkdsk 결과를 확인하는 방법
12187정성태3/12/202015576오류 유형: 605. NtpClient was unable to set a manual peer to use as a time source because of duplicate error on '...'.
12186정성태3/12/202017398오류 유형: 604. The SysVol Permissions for one or more GPOs on this domain controller and not in sync with the permissions for the GPOs on the Baseline domain controller.
... 61  62  63  64  65  66  67  68  [69]  70  71  72  73  74  75  ...