Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 61  62  63  64  65  66  67  68  69  70  [71]  72  73  74  75  ...
NoWriterDateCnt.TitleFile(s)
12192정성태3/14/202021001개발 환경 구성: 484. docker - Sybase Anywhere 16 컨테이너 실행
12191정성태3/14/202022269개발 환경 구성: 483. docker - OracleXE 컨테이너 실행 [1]
12190정성태3/14/202017041오류 유형: 606. Docker Desktop 업그레이드 시 "The process cannot access the file 'C:\Program Files\Docker\Docker\resources\dockerd.exe' because it is being used by another process."
12189정성태3/13/202022483개발 환경 구성: 482. Facebook OAuth 처리 시 상태 정보 전달 방법과 "유효한 OAuth 리디렉션 URI" 설정 규칙
12188정성태3/13/202027976Windows: 169. 부팅 시점에 실행되는 chkdsk 결과를 확인하는 방법
12187정성태3/12/202017058오류 유형: 605. NtpClient was unable to set a manual peer to use as a time source because of duplicate error on '...'.
12186정성태3/12/202018683오류 유형: 604. The SysVol Permissions for one or more GPOs on this domain controller and not in sync with the permissions for the GPOs on the Baseline domain controller.
12185정성태3/11/202019526오류 유형: 603. The browser service was unable to retrieve a list of servers from the browser master...
12184정성태3/11/202021492오류 유형: 602. Automatic certificate enrollment for local system failed (0x800706ba) The RPC server is unavailable. [3]
12183정성태3/11/202018706오류 유형: 601. Warning: DsGetDcName returned information for \\[...], when we were trying to reach [...].
12182정성태3/11/202020390.NET Framework: 901. C# Windows Forms - Vista/7 이후의 Progress Bar 업데이트가 느린 문제파일 다운로드1
12181정성태3/11/202020726기타: 76. 재현 가능한 최소한의 예제 프로젝트란? - 두 번째 예제파일 다운로드1
12180정성태3/10/202017411오류 유형: 600. "Docker Desktop for Windows" - EXPOSE 포트가 LISTENING 되지 않는 문제
12179정성태3/10/202028676개발 환경 구성: 481. docker - PostgreSQL 컨테이너 실행
12178정성태3/10/202021338개발 환경 구성: 480. Linux 운영체제의 docker를 위한 tcp 바인딩 추가 [1]
12177정성태3/9/202020510개발 환경 구성: 479. docker - MySQL 컨테이너 실행
12176정성태3/9/202020032개발 환경 구성: 478. 파일의 (sha256 등의) 해시 값(checksum) 확인하는 방법
12175정성태3/8/202020079개발 환경 구성: 477. "Docker Desktop for Windows"의 "Linux Container" 모드를 위한 tcp 바인딩 추가
12174정성태3/7/202019092개발 환경 구성: 476. DockerDesktopVM의 파일 시스템 접근 [3]
12173정성태3/7/202020850개발 환경 구성: 475. docker - SQL Server 2019 컨테이너 실행 [1]
12172정성태3/7/202025033개발 환경 구성: 474. docker - container에서 root 권한 명령어 실행(sudo)
12171정성태3/6/202020020VS.NET IDE: 143. Visual Studio - ASP.NET Core Web Application의 "Enable Docker Support" 옵션으로 달라지는 점 [1]
12170정성태3/6/202017657오류 유형: 599. "Docker Desktop is switching..." 메시지와 DockerDesktopVM CPU 소비 현상
12169정성태3/5/202020539개발 환경 구성: 473. Windows nanoserver에 대한 docker pull의 태그 사용 [1]
12168정성태3/5/202022120개발 환경 구성: 472. 윈도우 환경에서의 dockerd.exe("Docker Engine" 서비스)가 Linux의 것과 다른 점
12167정성태3/5/202019944개발 환경 구성: 471. C# - 닷넷 응용 프로그램에서 DB2 Express-C 데이터베이스 사용 (3) - ibmcom/db2express-c 컨테이너 사용
... 61  62  63  64  65  66  67  68  69  70  [71]  72  73  74  75  ...